| Exterior Construction: | ||||
|---|---|---|---|---|
| Front and Rear Frame: | Hot zinc spray high tensile steel | |||
| Roof Panel: | High grade stainless steel | |||
| Side Panel: | Muffler grade stainless steel | |||
| Doors: | Plymetal | |||
| Top and Bottom Rails: | Hot zinc spray high tensile steel | |||
| Crossmembers/Floor: | Aluminium or steel/Corrugated | |||
| Genset Receptacles: | Yes | Dimensions – Internal | 20′ Standard | 40′ Standard | 40′ High Cube |
| Length: | 5,440 mm | 11,583 mm | 11,583 mm | |
| Width: | 2,294 mm | 2,294 mm | 2,294 mm | |
| Height: | 2,276 mm | 2,276 mm | 2,548 mm | |
| Door Opening Width: | 2,294 mm | 2,294 mm | 2,294 mm | |
| Door Opening Height: | 2,264 mm | 2,264 mm | 2,571 mm | |
| Cubic Capacity: | 28.4 m3 | 60 m3 | 67.7 m3 | |
| Weight & Payload: | 20′ Standard | 40′ Standard | 40′ High Cube | |
| Tare Weight | ||||
| (incl. machinery): | 3,140 kg | 4,900 kg | 4,575 kg | |
| Maximum Gross Weight: | 27,000 kg | 32,500 kg | 34,000 kg | |
| Maximum Payload: | 23,860 kg | 27,600 kg | 29,425 kg | |
| Interior Construction | 20′ Standard | 40′ Standard | 40′ High Cube | |
| Roof Panel: | Aluminium, one piece, with small corrugations | |||
| Side Panel: | Stainless steel, corrugated panel | |||
| Doors: | Aluminium sheet | |||
| Floor | ||||
| (high aluminium extruded T shaped) | ||||
| : | 40.0 mm | 63.5 mm | 63.5 mm | |
| Drains: | 2 front and 2 rear | |||
| General | 20′ Standard | 40′ Standard | 40′ High Cube | |
| K value | ||||
| (heat leakage incl. machinery): | 21.0 kcal/hr/°C | 21.0 kcal/hr/°C | 21.0 kcal/hr/°C | |
| Max Air Leakage (@ 25 mm SWG): | 5.0 m3/hr | 5.0 m3/hr | 5.0 m3/hr | |
| Tests | 20′ Standard | 40′ Standard | 40′ High Cube | |
| Floor Strength | ||||
| (axle load) | ||||
| : | 7,260 kg | 7,260 kg | 7,260 kg | |
| Stacking Height: | 9 High | 9 High | 9 High | |
| Stacking Test Load per Post: | 97,200 kg | 97,200 kg | 97,200 kg | |
| Container Classification: | Bureau Veritas | |||
| Thermal Test: | In compliance with ATP standard | |||
| Airflow and Ventilation Rate: | In compliance with ATO/DLO (Sprenger approved) |
